Panasonic PT-DW11K 11000 Lumens WXGA Projector
SKU: AVPR202
Wholesale Panasonic PT-DW11K 11000 Lumens WXGA Projector at AV Projector Room. Extended Warranty with free service within Malaysia.Panasonic Large Venue Projector Malaysia
Suitable for:
- Event, Staging
- Museum, Exhibition, Digital Signage
- Office, Corporate, Theater, Auditorium
- University, Schools, Lecture Halls
-
PRODUCT DETAILS
Compact 12000 lumens-class Projector. Designed for events and staging applications
KEY FEATURES
- 3-chip DLP, 11000 lumens, WXGA
- High brightness and high contrast ratio make bright, crisp and sharp image
- Dual lamp system with Lamp Relay mode enables 24/7 operation
- 10,000:1 contrast ratio
- Edge blending function and colour matching
Specifications
Power supply 120 V AC, 9.1 A, 50/60 Hz; 220-240 V AC, 4.8 A, 50/60 Hz Power Consumption (120V AC, 50/60Hz) 980 W (1,010 VA) (0.2 W with standby mode set to eco. 6 W with standby mode set to normal. Both with fan stopped.) Power Consumption (220-240V AC, 50/60Hz) 950 W (980 VA) (0.3 W with standby mode set to eco. 9 W with standby mode set to normal. Both with fan stopped.) DLP� chip Panel size 21.6 mm (0.85 inches) diagonal (16:9 aspect ratio) DLP� chip Display method DLP� chip x 3 (R, G, B), DLP� projection system DLP� chip Pixels 1,049,088 (1,366 x 768) x 3, total of 3,147,264 pixels LENS Optional powered zoom/focus lenses Lamp 380 W UHM lamps (x 2) (dual lamp, high mode) Screen size 1.78-25.4 m (70-1,000 inches) (1.78-15.24 m (70-600 inches) with the ET-D75LE8), 16:10 aspect ratio Brightness 11,000 lumens (dual lamp, high mode) Center-to-corner uniformity 90% Contrast 10,000:1 (full on/full off, in dynamic iris 3 mode) Resolution 1,366 x 768 pixels (Input signals that exceed this resolution will be converted to 1,366 x 768 pixels.) Scanning Frequency (HDMI/DVI-D/RGB) Horizontal: 15 kHz-100 kHz, vertical: 24 Hz - 120 Hz, dot clock: 25-162 MHz or lower (HDMI/DVI: 25 MHz - 162 MHz) Scanning frequency YPBPR (YCBCR) 525i (480i): fH 15.75 kHz; fV 60 Hz, 625i (576i): fH 15.63 kHz; fV 50 Hz, 525p (480p): fH 31.50 kHz; fV 60 Hz, 625p (576p): fH 31.25 kHz; fV 50 Hz, 750 (720)/60p: fH 45.00 kHz; fV 60 Hz, 750 (720)/50p: fH 37.50 kHz; fV 50 Hz, 1125 (1035)/60i: fH 33.75 kHz; fV 60 Hz, 1125 (1080)/60i: fH 33.75 kHz; fV 60 Hz, 1125 (1080)/50i: fH 28.13 kHz; fV 50 Hz, 1125 (1080)/25p: fH 28.13 kHz; fV 25 Hz, 1125 (1080)/24p: fH 27.00 kHz; fV 24 Hz, 1125 (1080)/24sF: fH 27.00 kHz; fV 48 Hz, 1125 (1080)/30p: fH 33.75 kHz; fV 30 Hz, 1125 (1080)/60p: fH 67.50 kHz; fV 60 Hz, 1125 (1080)/50p: fH 56.25 kHz; fV 50 Hz Scanning Frequency (Video/S-Video) fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60] fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM] Optical axis shift Vertical �70% (�60% with the ET-D75LE6) from center of screen, powered; NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50. Optical axis shift Horizontal �30% (�20% with the ET-D75LE6) from center of screen, powered; NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50. Keystone correction range Vertical �40�(vertical �22� with the ET-D75LE5/LE50, vertical �28� with the ET-D75LE6) Installation Ceiling/floor, front/rear Terminals HDMI IN HDMI 19-pin x 1, Deep Color, compatible with HDCP, 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p,750(720)50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p,1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p,1125(1080)/50p; VGA (640 x 480) - WUXGA (1,920 x 1,200), dot clock: 25 MHz -162 MHz; NOTE: Compatible with non-interlaced signals only. Terminals DVI-D IN DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only; 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p; VGA (640 x 480) - WUXGA (1,920 x 1,200), dot clock: 25 MHz -162; MHz NOTE: Compatible with non-interlaced signals only Terminals RGB 1 IN BNC x 5 Terminals RGB 1 IN R, G, B R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms; HD, VD/SYNC: TTL, high impedance, positive/negative automatic; NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals. Terminals RGB 1 IN Y, PB, PR (Y, CB, CR) Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms Terminals RGB 1 IN S-Video signal Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms Terminals RGB 2 IN D-sub HD 15-pin (female) x 1 Terminals RGB 2 IN R, G, B R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms; HD, VD/SYNC: TTL, high impedance, positive/negative automatic; NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals. Terminals RGB 2 IN Y, PB, PR (Y, CB, CR) Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms Terminals VIDEO IN BNC x 1, 1.0 Vp-p, 75 ohms Terminals 3D SYNC 1 IN/OUT BNC x 1, 1.0 Vp-p, 75 ohms; Input: TTL, high impedance. Output: TTL, max. 10 mA Terminals 3D SYNC 2 OUT BNC x 1, 1.0 Vp-p, 75 ohms, TTL, max. 10 mA Terminals SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant) Terminals SERIAL OUT D-sub 9-pin (male) x 1 for link control(RS-232C compliant) Terminals Remoter 1 In M3 jack x 1 for wired remote control Terminals Remoter 1 Out M3 jack x 1 for link control Terminals Remoter 2 In D-sub 9-pin x 1 for external control (parallel) Terminals LAN RJ-45 x 1 for network connection, 100Base-TX/10Base-T, compliant with PJLink� (class 1) Power cord length 3.0 m (9 ft 10 in) Cabinet materials Molded plastic Dimensions (W x H x D) 530 x 200 x 548.5 mm (20-7/8 x 7-7/8 x 21-19/32 inches) (without lens) Weight 24 kg (52.9 lbs) (without lens) Operation noise 45 dB (high mod