top of page
Panasonic PT-DX820U 8200 Lumens XGA DLP Projector

Panasonic PT-DX820U 8200 Lumens XGA DLP Projector

SKU: AVPR225
 Specialize in audio visual Panasonic PT-DX820U 8200 Lumens XGA DLP Projector at AV Projector Room. Guaranteed support with Cheap price within Kuala Lumpur.

Panasonic Education / Business Data Presentation / Installation Projector Malaysia

Suitable for:

  • Museum, Exhibition, Digital Signage
  • Office, Corporate, Theater, Auditorium
  • University, Schools, Lecture Halls

 

 

  • 1-Chip DLP, 8200 lumens, XGA
  • Dual lamp system with up to 6000 hours lamp life (in eco mode). Lamp relay mode enabes 24/7 operation
  • Dust-resistant optical engine allows filter-less design
  • Multi-screen support including edge blending and colour matching function
  • Specifications

    Power supply 120-240 V AC 9.0-4.0 A, 50/60 Hz
    DLP� chip | Panel size 17.8 mm (0.7 in) diagonal (4:3 aspect ratio)
    DLP� chip | Display method DLP� chip x 1, DLP� system
    DLP� chip | Pixels 786,432 (1,024 x 768) x 1, total of 786,432 pixels
    LENS PT-DX820W/B
    Powered zoom/focus lenses (1.7-2.4:1), F 1.7-1.9, f 25.6-35.7 mm
    PT-DX820LW/LB
    Optional powered zoom/focus lenses and fixed-focus lens
    Lamp 310 W UHM lamps (x 2)
    Screen size 1.27-15.24 m (50- 600 inches)
    *1.27 - 5.08 m (50 - 200 inches) with the ET-DLE055 (16:10 aspect ratio)
    *2.54 - 8.89 m (100 - 350 inches) with the ET-DLE030 (16:10 aspect ratio)
    Brightness 8,200 lumens (dual lamp, LAMP MODE: NORMAL)
    Center-to-corner uniformity 90%
    Contrast 2,400:1 (full on/full off, in dynamic iris 3 mode)
    Resolution 1,024 x 768 pixels
    Scanning frequency | HDMI/DVI-D fH: 15-100 kHz, fV: 24-120 Hz, dot clock: 25-162 MHz
    Scanning frequency | RGB fH: 15-100 kHz, fV: 24-120 Hz, dot clock: 20-162 MHz
    Scanning frequency | YPBPR (YCBCR) 525i (480i): fH 15.75 kHz; fV 60 Hz,
    625i (576i): fH 15.63 kHz; fV 50 Hz,
    525p (480p): fH 31.50 kHz; fV 60 Hz,
    625p (576p): fH 31.25 kHz; fV 50 Hz,
    750 (720)/60p: fH 45.00 kHz; fV 60 Hz,
    750 (720)/50p: fH 37.50 kHz; fV 50 Hz,
    1125 (1035)/60i: fH 33.75 kHz; fV 60 Hz,
    1125 (1080)/60i: fH 33.75 kHz; fV 60 Hz,
    1125 (1080)/50i: fH 28.13 kHz; fV 50 Hz,
    1125 (1080)/25p: fH 28.13 kHz; fV 25 Hz,
    1125 (1080)/24p: fH 27.00 kHz; fV 24 Hz,
    1125 (1080)/24sF: fH 27.00 kHz; fV 48 Hz,
    1125 (1080)/30p: fH 33.75 kHz; fV 30 Hz,
    1125 (1080)/60p: fH 67.50 kHz; fV 60 Hz,
    1125 (1080)/50p: fH 56.25 kHz; fV 50 Hz
    Optical axis shift Vertical: -13% - +50% (powered) (-13% - +45% with the ET-DLE085/DLE105)
    horizontal: -10% - +30% (powered) (-10% - +28% with the ET-DLE085/DLE105)
    NOTE: Optical
    If using the ET-DLE030, the optical axis is fixed.
    axis shift function cannot be operated when used with the ET-DLE055
    Keystone correction range Vertical �40�, horizontal: �15�
    (Vertical: �22� with the ET-DLE055/DLE085/DLE105),
    (Vertical: �5� with the ET-DLE030)
    Curved correction (Geometric adjustment)
    4 corner correction
    Installation Ceiling/floor, front/rear
    Terminals | HDMI IN HDMI 19-pin x 1, Deep Color, compatible with HDCP,
    Terminals | DVI-D IN DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible,
    for single link only
    Terminals | RGB 1 IN BNC x 5
    Terminals | RGB 1 IN | R, G, B R: 0.7 Vp-p, 75 ohms,
    G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
    B: 0.7 Vp-p, 75 ohms
    HD, VD/SYNC: TTL, high impedance, positive/negative automatic
    NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
    Terminals | RGB 1 IN | Y, PB, PR (Y, CB, CR) Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
    Terminals | RGB 1 IN | Video signal 1.0 Vp-p, 75 ohms
    Terminals | RGB 2 IN D-sub HD 15-pin (female) x 1
    Terminals | RGB 2 IN | R, G, B R: 0.7 Vp-p, 75 ohms,
    G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
    B: 0.7 Vp-p, 75 ohms
    HD, VD/SYNC: TTL, high impedance, positive/negative automatic
    NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
    Terminals | RGB 2 IN | Y, PB, PR (Y, CB, C