top of page
Panasonic PT-EZ590 3LCD 5400 Lumens WUXGA Projector

Panasonic PT-EZ590 3LCD 5400 Lumens WUXGA Projector

SKU: AVPR221
 View Panasonic PT-EZ590 3LCD 5400 Lumens WUXGA Projector at AV Projector Room. High quality with with Installation within Kuala Lumpur.

Panasonic Education / Business Data Presentation / Installation Projector Malaysia

Suitable for:

  • Museum, Exhibition, Digital Signage
  • Office, Corporate, Theater, Auditorium
  • University, Schools, Lecture Halls

 

 

  • LCD, 5400 lumens, WUXGA
  • High brightness and high resolution in compact and lightweight body
  • Dust resistant cabinet and up to 15 000 hours maintenance free Eco Filter
  • Powered with lens-shift and a wide range of optional lenses
  • 10,000:1 contrast ratio (in high contrast mode)
  • Specifications

    Power supply AC100 - 240V 5.5 - 2.3A 50Hz/60Hz
    Power consumption 484W
    Power consumption | Standby Mode (Eco) 0.5W, 0.3W (Taiwan)
    Power consumption | Standby Mode (Normal) 12W
    Power consumption | Standby Mode (Normal and Audio monitor out) 30W
    BTU value Max 1,651 BTU
    LCD panel | Panel size 16.3 mm (0.64 in) diagonal (16:10 aspect ratio)
    LCD panel | Display method Transparent LCD panel (x 3, R/G/B)
    LCD panel | Drive method Active matrix
    LCD panel | Pixels 2,304,000 (1,920 x 1,200) x 3, total of 6,912,000 pixels
    LENS Powered zoom (throw ratio 1.22-2.26:1),
    powered focus, F 1.6-2.2, f 17.1-31.7 mm
    Lamp 320W UHM lamp
    Lamp replacement cycle
    4,000 hours (lamp power: Normal), 5,000 hours (lamp power: Eco)
    This is the maximum value when the lamp is turned on for 2 hours
    and off for 0.25 hours.
    Screen size 1.02- 10.16 m (40-400 inches) (16:10 aspect ratio)
    Brightness 5,400 lumens
    (Lamp power: Normal, Dynamic mode, Iris off, Daylight View:off, Auto Power Save:off)
    Center-to-corner uniformity 90%
    Contrast 10,000:1
    (Lamp power: Normal, Dynamic mode, Iris on, Daylight View:off, Auto Power Save:off)
    Resolution 1,920 x 1,200 pixels (WUXGA)
    Scanning frequency | HDMI/DIGITAL LINK fH: 15- 90kHz, fV: 24 - 100Hz, dot clock: 25 - 162 MHz
    Scanning frequency | RGB fH: 15- 90kHz, fV: 24 - 100Hz, dot clock: 162 MHz or lower
    Scanning frequency | YPBPR (YCBCR) 525i (480i): fH15.73 kHz; fV59.94 Hz,
    625i (576i): fH15.63 kHz; fV50 Hz,
    525p (480p): fH31.47 kHz; fV60 Hz,
    625p (576p): fH31.25 kHz; fV50 Hz,
    750 (720)/60p: fH45.00 kHz; fV60 Hz,
    750 (720)/50p: fH37.50 kHz; fV50 Hz,
    1125 (1080)/60i: fH33.75 kHz; fV60 Hz,
    1125 (1080)/50i: fH28.13 kHz; fV50 Hz,
    1125 (1080)/25p: fH28.13 kHz; fV25 Hz,
    1125 (1080)/24p: fH27.00 kHz; fV24 Hz,
    1125 (1080)/24sF: fH27.00 kHz; fV48 Hz,
    1125 (1080)/30p: fH33.75 kHz; fV30 Hz,
    1125 (1080)/60p: fH67.50 kHz; fV60 Hz,
    1125 (1080)/50p: fH56.25 kHz; fV50 Hz
    Scanning frequency | Video/S-Video fH: 15.75 kHz, fV: 59.94 Hz [NTSC/NTSC4.43/PAL-M/PAL60]
    fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
    Keystone correction range Vertical: �40 �, horizontal: �20 �
    (up to a total of �60 � during simultaneous horizontal and vertical correction)
    Optical axis shift Vertical: �60% (powered) Horizontal: �30% (powered )
    Installation Ceiling/ oor, front/rear
    Speaker 4.0 cm (1-9/16 in) (monaural) x 1
    Terminals | HDMI IN 1/HDMI IN 2 HDMI 19-pin x2, Deep Color, compatible with HDCP,
    Audio signal: linear PCM
    (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)
    Terminals | DIGITAL LINK IN RJ-45 x 1 (HDBaseT� compatible), Deep Color, compatible with HDCP,
    Audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)
    Terminals | RGB 1 IN BNC x 5
    Terminals | RGB 1 IN | R, G, B 0.7 Vp-p, 75 ohms, (G: 1.0 Vp-p, 75 ohms for sync on G)
    H D/VD, SYNC: TTL, high impedance,
    positive/negative automatic
    Terminals | RGB 1 IN | Y, PB, PR (Y, CB, CR) Y: 1.0 Vp-p (including sync signal),
    PBPR(CBCR): 0.7 Vp-p, 75 ohms
    Terminals | RGB 1 IN | Y/C Y: 1.0 Vp-p (including sync signal), C: 0.286 Vp-p, 75 ohms
    Terminals | RGB 2 IN D-sub HD 15-pin (female) x 1
    Terminals | RGB 2 IN | R, G, B 0.7 Vp-p, 75 ohms, (G: 1.0 Vp-p, 75 ohms for sync on G)
    H D/VD, SYNC: TTL, high impedance,
    positive/negative automatic
    NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
    Terminals | RGB 2 IN | Y, PB, PR (Y, CB, CR) Y: 1.0 Vp-p (including sync signal),
    PBPR(CBCR): 0.7 Vp-p, 75 ohms
    Terminals | VIDEO IN Pin jack x 1, 1.0 Vp-p, 75 ohms
    Terminals | MONITOR OUT D-sub HD 15-pin (female) x 1
    Terminals | MONITOR OUT | R, G, B 0.7 Vp-p, 75 ohms, (G: 1.0 Vp-p, 75 ohms for sync on G)
    HD/VD, SYNC: TTL, high impedance,
    positive/negative automatic
    Terminals | MONITOR OUT | Y, PB, PR Y: 1.0 Vp-p (including sync signal), PBPR: 0.7 Vp-p, 75 ohms
    Terminals | AUDIO IN 1/AUDIO IN 2 M3 x 2, 0.5 Vrms, input impedance: 22 kilohms or mor
    Terminals | AUDIO IN 3 Pin jack(L, R) x 1, 0.5 Vrms, input impedance: 22 kilohms or more
    Terminals | VARIABLE AUDIO OUT M3 x 1 (monitor out, stereo)
    0-2.0 Vrms, variable, output impedance: 2.2 kilohms or less
    Terminals | SERIAL IN D-sub 9 p x 1, for external control (RS-232C compliant)
    Terminals | Remoter 1 In D-sub 9-pin (female) x1, for external control (parallel)
    Terminals | Remoter 2 In M3 jack x 1 for wired remote control
    Terminals | LAN RJ-45 x 1 for network connection 10Base-T/100Base-TX,
    compatible with Art-Net, PJLink�(Class 1)
    Terminals | WIRELESS USB Type A x 1, for wireless projection with optional dongle (ET-WML100)
    Terminals | DC OUT USB Type A x 1, for power supply (DC5 V, max 900 mA)
    Power cord length 3.0 m (9 ft10 in)
    Cabinet materials Molded plastic
    Dimensions (W x H x D) 498 x 145*3 x 398.3mm
    (19-19/32 x 5-11/16*3 x 15-11/16 in ) with supplied lens
    Weight A